Wheatheart Self-Propelled Auger Kit (Competitors Models) - Manual (Page 30)

3. A SSEMBLY W HEATHEART - S ELF -P ROPELLED A UGER K IT
3.15. C USHION V ALVE I NSTALLATION C OMPETITOR M ODELS
30 30766 R0
3.15. CUSHION VALVE INSTALLATION
Connect the hoses as shown in Figure 3.16 and 3.17, ensuring that the hoses
are not crossed. Connect the lower cushion block hoses to the lower ports on
each hydraulic motor as shown.
Figure 3.16 Cushion Block Installation
Figure 3.17 Cushion Block Installation Schematic
NOTICE
Do not over-tighten fittings! Over-tightening
hose fittings can crack the fittings or motor
body and will void the warranty.