Dymo LabelWriter EL60 - Manual (Page 35)

31
Appendix A
Technical Specifications
This section gives the printer specifications for all the LabelWriter printers. You will also find
information on DYMO’s Software Development Kit which will allow you to use the LabelWriter
printer and software with your application.
Printer Specifications
EL40 EL60 Turbo 300 330
330
Turbo
310 315 320
Print Method Direct Thermal
Print Resolution
203 dots per inch
(80 dots per mm) 300 dots per inch (118 dots per mm)
Print Speed
(labels/min for 4-line
address label in text mode)
12 12 32 16 16 32 8 8 16
Maximum Print Width
1.57"
40 mm
2.25"
56 mm
2.25"
56 mm
1.57"
40 mm
2.25"
56 mm
2.25"
56 mm
1.57"
40 mm
1.57"
40 mm
2.25"
56 mm
Maximum Media Width 2.44" (62 mm) in all printers
Maximum Label Length User-definable
Paper Handling Maximum 300 feet (91 meters) of thermal paper; 1200" (30 meters) of labels
Interface USB (USB Spec 1.1 protocol); Serial (Bi-directional, RS232) USB (USB Spec 1.1 protocol)
Serial Printer Settings
19,200 baud,
8 data bits, no
parity, hardware
handshaking 115,200 baud, 8 data bits, no parity,
hardware handshaking N/A N/A N/A
Dimensions 4 7/8" (12.4 cm) x 5 3/4" (14.6 cm) x 7 1/4" (18.4 cm) (WHD)
Weight 1 1/2 pounds (0.68 kg)
Average Print Head Life 2,000,000 linear inches (over 31 miles) 50800 linear meters
Printer Power
Requirements
100-240 V ~ 850 mA 47-63 Hz, Class II
The LabelWriter printer’s internal power
supply allows you to use it Worldwide
with an appropriate adapter.
24 VDC 1.0 A 24 VDC 0.63 A 24 VDC
1.0 A
Regulatory Approvals CE, FCC, cTUVus, GS and C-Tick
Warranty One Year Limited