Using the label maker for the first time – Dymo LabelManager 220P User Manual
Page 7
7
Using the Label Maker for the First Time
The first time you turn on the power, you are asked to select the language and units
of measure. These selections will remain set until you change them, or until the
label maker is reset. You can change these selections using the Settings key.
To set up the label maker
Press
1.
{
to turn on the power.
Select the language and press
2.
}
.
By default, the language is set to English. The language option you choose
determines the character set that is available.
Select inches or mm and press
3.
}
.
Select the width of the tape cassette currently inserted in the label maker.
4.
You are now ready to print your first label.
To print a label
Enter text to create a simple label.
1.
Press
2.
G
.
Select the number of copies.
3.
Press
4.
}
to print.
Press the cutter button to cut the label.
5.
Congratulations! You printed your first label. Continue reading to learn more
about the options available for creating labels.
LM220P-UK_WEU.indd 7
25-07-2007 14:45:11