ClearOne Ceiling Microphone Array - Manual (Page 9)

INSTALLATION MANUAL 6
7. Attach the Microphone Array to the hanging end of the mini-XLR cable.
8. Connect the RJ45 Male to Mixer adapter cable for your mixer: The Converge Pro requires
the RJ45 to mini-Phoenix adapter cable. The RJ45 to XLR-M adapter is for the Interact Pro
and Interact AT mixers.
9. Connect the CAT5e cable from the Ceiling Microphone Array to the adapter cable ordered
to match the microphone inputs on the mixer.
» Note: There are three connectors that plug into the mixer, one for each of the three
microphones in the array.
Mini-Phoenix Adapter
for Converge Pro and
Interact Pro Mixers
XLR-M Adapter for
the Interact AT Mixer
CAT5e Cable Inputs