ClearOne Ceiling Microphone Array - Manual (Page 6)

3 Technical Support: 800.283.5936
PASS-THROUGH MOUNTING ASSEMBLY
This assembly includes a threaded body with integrated mini-XLR and RJ45 connectors, and
the required washers and nuts for fastening in a suspended ceiling tile.
TOOLS REQUIRED
You will need a drill and a 1-inch hole saw bit to install the mounting adapter, and an adjust-
able wrench to tighten the adapter fittings.
DETERMINING THE PLACEMENT
Determine the placement of the Ceiling Microphone Array by the characteristics of the room
where it will be installed and the pickup pattern of the microphone array. The choice of either
the 12 or 24-inch microphone cable determines how close the microphone array is to the users
below and how wide the pickup pattern extends. Single and Dual Array pickup patterns and
placements are illustrated below:
Microphone Array End
Includes 4-pin Mini-XLR Connector
Cable to Mixer End
Includes Female RJ45 Connector
SINGLE MICROPHONE ARRAY PICK-UP PATTERN
120° from mic array
(Best pick-up) 180° from mic array
(Good pick-up)
DUAL MICROPHONE ARRAY PICK-UP PATTERN
120° from either mic array
(Best pick-up) 180° from either mic array
(Good pick-up)