ClearOne CHAT 60-U Manual - Manual (Page 11)

8 Technical Support: 800.283.5936
4. Once the file has been located and highlighted, click the Update button to load the selected firmware file.
5. A warning dialog appears. Click yes to load the selected firmware file or No to cancel.
6. A series of messages appears under the progress bar indicating the update is in progress.
WARNING: do not unplug the CHAT 60-U while the manual update is in progress.
when the update is complete, a message will appear below the progress bar stating that the update has been
successful with the appropriate revision level information if applicable.
> NOTE: If firmware programming was interrupted, such as by a power loss or an accidental cable
disconnection, the CHAT 60-U might become unstable. In this case, refer to Interrupted Firmware
Update Recovery in Chapter 4 of this manual.
HELP
The Help button provides the following options:
Click • Help to activate the online help file.
Click • About to get information about your CHAT 60-U
Click • ClearOne Homepage to visit the ClearOne website using your default web browser.
Click • Registration to register your CHAT 60-U with ClearOne using your default web browser.