ClearOne SLX300 SpeakerLinX - Manual (Page 5)

Chapter 1: Installing the SLX300 1
Chapter 1: Installing the SLX300
The SLX300 SpeakerLinX is a high power, networked audio amplifier. This amplifier may be
mounted any distance from the speaker location; however, longer speaker wires may result in
some distortion of the audio waveform. In addition to being a very capable amplifier, the SLX300
can also function as the zone or room controller and has a built-in web server which can provide
a user interface. Each zone of audio must have at least one SpeakerLinX. Combining the amplifier
and room controller, and connecting local audio sources to the SpeakerLinX minimizes the amount
of cabling required to accomplish multiple functions.
» NOTE: The SLX300 and the SLX300i are identical except for the power input. The
SLX300 is the 120 Volt, US model, and the SLX300i is the 240 Volt, International
model.
CONNECTIONS AND INDICATORS
The SLX300 has connections for the following:
• 10/100Mb Ethernet (RJ45)
• Two +4 dBu Stereo Balanced Audio Inputs (3.5mm, 2 x 3 pin Phoenix-style)
• Two +4 dBu Stereo Balanced Audio Outputs (3.5 mm, 2 x 3 pin Phoenix-style)
• Two Stereo Speaker Outputs (7.5mm, 2 x 2 pin Phoenix-style)
• IEC Power Cord Inlet (according to US or International model ordered)
• StreamNet EIM (RJ45)
• Monitoring Jack (1/4-inch, on front)
Stereo
Speaker
Outputs
Stereo
Balanced
Audio
Outputs
EIM for
Audio Port,
BluePort,
IRLinX or
KeyLinX
Ethernet
Network
Power
Cord
Input
On/Off
Switch
Stereo
Balanced
Audio
Inputs
Fuse
Access
Monitoring
Jack
Power/Status
LED