Rs232, Control – ClearOne NS-MU5066 User Manual
Page 7
RS232
c
CONTROL
All specifications subject to change without notification. All rights reserved. Copyright © 2005 NetStreams
main.512.977.9393 / fax.512.977.9398 / 3600 W. Parmer Lane Suite 100, Austin, TX 78727 / www.netstreams.com
NS-0505-7127
7
The protocol described in this document provides the following commands, which
are described in detail below:
•
Status(Stat) –Doorbell(Door), Phone, Switched Outlet(SwOu), Version(Ver),
IR Frequency(IRFreq) & (IRFreqExt), MacroIndex, Tuning Mode(Mode),
Tuner Frequency(Freq)
•
State – Version, Source, Source name, IR Frequency, EXT IR Frequency,
Macro Index, Backlight Color, Backlight Brightness, Amplifier Output, Speaker
Impedance, Door, Phone, Source Control (SwOu), Volume, Balance, Mute,
Loudness, 3D Sound, Equalizer, Preset names, Tuner Frequency, Tuning
Mode, Preset, Spacing, Threshold Sensitivity, Pre Emphasis, Reception,
Preset Frequency.
•
Change – Amp, Balance(Bal), Backlight Color(BaCo), Backlight Level(BaLi),
Doorbell(Door), Loud, Phone, mute, Switched Outlet(SwOu), Source(Src),
Store, IRFreQ, IRFreqExt, MacroIndex, Volume(Vol), and tuner commands
Pre, Mode, Freq, StoreTuner.
•
Chang - Source, Source name, IR Frequency, EXT IR Frequency, Macro
Index, Backlight Color, Backlight Brightness, Amplifier Output, Speaker
Impedance, Door, Phone, Source Control (SwOu), Volume, Balance, Mute,
Loudness, 3D Sound, Equalizer, Preset names, Tuning, Tuner Frequency,
Tuning Mode, Preset, Spacing, Threshold Sensitivity, Pre Emphasis,
Reception, Preset Frequency.
•
Nudge – Single adjustments in one direction, Balance(f), Backlight Level(l),
Loud, Source, Tune, Mode, and Volume(v), Source, Source name, IR
Frequency, EXT IR Frequency, Macro Index, Backlight Color, Backlight
Brightness, Amplifier Output, Speaker Impedance, Door, Phone, Source
Control (SwOu), Volume, Balance, Mute, Loudness, 3D Sound, Equalizer,
Preset names, Tuning, Tuner Frequency, Tuning Mode, Preset, Spacing,
Threshold Sensitivity, Pre Emphasis, Reception, Preset Frequency.
•
Execute(Exe) – The selected keypad button action Press, Hold, Menu, Lock,
and Tuner preset memory(Pre)
•
IR- Allows uploading and Downloading of IR commands
•
AllOff – All zones off command
•
ALLON – All zones on command (Turns all zones on to last known state. If
you need to turn on all zone to a known source use the ChangeSrc command
to turn on all zones.
•
Event – These commands control the unsolicited data subscriptions;
Source(Src), Source Name(Store), Button Press(Press), Room Data(Data),
Tuner Status(Tuner), and Tuner Preset Names(StoreTuner)
The system will send unsolicited data after any changes in the system are made. Input lines
are to be terminated with a CR or a CR/LF combination.