Pre-wiring – ClearOne NS-MU5066 User Manual
Page 17
PRE-WIRING
All specifications subject to change without notification. All rights reserved. Copyright © 2005 NetStreams
main.512.977.9393 / fax.512.977.9398 / 3600 W. Parmer Lane Suite 100, Austin, TX 78727 / www.netstreams.com
NS-0505-7127
17
Pre-wiring for NetStreams products is easy once the architecture is understood.
Think of the devices below like computers in a sense or a device that needs a
network connection and power.
1. NS-MU5066KP25S
2. NS-MU5066KP25
3. NS-MU5066KP50
These devices require power and data so it is recommended that a CAT5e and a
16/4 or 14/4 Siamese cable be run to them from the Audio/Video head end. These
devices can be placed anywhere in the home as long as they have access to the
network.
EIM devices such as the Audio Port or MU290 amplifier only require a CAT5e to be
run from the Keypad device to the EIM devices. The MU290 has a loop through of
the EIM bus. This will allow all products to be linked with one CAT5e in a local area.
Terminating wires
Tools needed
a. RJ45 crimpers
b. CAT5 Stripper
c. Wire cutters/strippers
d. Small flat head screw driver
Parts needed
e. RJ45 connectors
f. Quick Connectors for power and speaker connections are provided.