Sample commands – ClearOne NS-MU5066 User Manual
Page 13
SAMPLE COMMANDS
All specifications subject to change without notification. All rights reserved. Copyright © 2005 NetStreams
main.512.977.9393 / fax.512.977.9398 / 3600 W. Parmer Lane Suite 100, Austin, TX 78727 / www.netstreams.com
NS-0505-7127
13
The following commands are examples of the control and status functions for the NS-MU5066.
Action
# Params Parameter(s)
Description
Example String
ChangeSrc/
2
Z/S
Changes Zone Z to Source S
“ChangeSrc/1/2”
ChangeSrc/
2
Z/S
Turn ON all zones to source 3
“ChangeSrc/0/3”
ChangeVol/
2
Z/V
Changes Zone Z's volume. Volume
immediately changes to volume V.
NudgeVol described below can also be
used to ramp volume.
“ChangeVol/1/11”
ChangeSrc/
2
Z/S
Turn OFF all zones
“ChangeSrc/0/0”
NudgeVol/
2
Z/D
Ramp zone Z's volume in direction D one
step.
“NudgeVol/1/0”
ChangeBass/
2
Z/B
Changes Zone Z’s bass.
“ChangeBass/1/15”
ExePress/
2
S/C
Send pause button command to source 2 “ExePress/2/1”
NudgeBass/
2
Z/D
Ramp zone Z's bass in direction D one
step.
“NudgeBass/1/0”
ChangeTreb/
2
Z/T
Change Zone Z's treble
“ChangeTreb/1/15”
ExeMenu/
2
Z/C
Launch Macro 1 from zone 2
“ExeMenu/2/4”
NudgeTreb/
2
Z/D
Ramp zone Z's treble in direction D one
step.
“NudgeTreb/1/0”
ChangeMute/
2
Z/X
Change Zone Z's mute
“ChangeMute/1/0”
ExeMenu/
2
Z/C
Send menu command on zone 4
“ExeMenu/4/1
ExePress/ 2 S/C
Execute
source S’s registered command
C. This is the equivalent function to
pressing one of the keypad source
transport buttons.
“ExePress/1/12”
ExeHold/ 2 S/C
Execute
source S’s registered command
C.
“ExeHold/1/12”
AllOff
0
Turn off all zones
“AllOff”
ChangeBaCo/
2
Z/X
Changes Zone Z’s Backlight Color.
(0=Green, 1=Amber)
“ChangeBaCo/1/0”
ExeMenu/
2
Z/C
Launch Macro 2 from zone 5
“ExeMenu/5/5”
ChangeDoor/ 1
X Doorbell
mode 0=Off, 1=On
“ChangeDoor/0”
StatDoor
0
-
Status of Doorbell mode
“StatDoor”
ChangeBal/
2
Z/F
Changes Zone Z’s Balance
“ChangeBal/1/7”
StatVer/
1
Z
Sends ADC Firmware version
“StatVer/0”
NudgeBal/
2
Z/D
Ramp Zone Z's Balance in direction D
one step.
“NudgeBal/1/0”
ChangePhone/ 1
X Phone
mode
0=Off, 1=On
“ChangePhone/0”
StatPhone 0 -
Status
of Phone mode
“StatPhone”
ChangeBaLi/
2
Z/L
Changes Zone Z’s Backlight Level (L).
0=off
“ChangeBaLi/1/0”
StatVer/
1
Z
Sends Zone 3 Keypad Firmware Version
“StatVer/3”
NudgeBaLi/
2
Z/D
Ramp Zone Z’s Backlight Level in
direction D one step.
“NudgeBaLi/1/0”
ChangeSwOu/ 1
X Switched
Outlet
mode 0=Off, 1=On
“ChangeSwOu/0”
StatSwOu
0
X
Status of Switched Outlet
“StatSwOu”
ChangeStore/
2
S/N
Changes source name for source on all
keypads.
“ChangeStore/1/12
ChangeLoud/
2
Z/U
Changes Zone z’s Loudness, Loudness
immediately changes to Loud U.
“ChangeLoud/1/1”