ClearOne StreamNet Integration User Manual
Page 54
![background image](/manuals/598158/54/background.png)
G-4
Technical Support: 800-283-5936
S
serviceName - A unique name assigned to each service in a StreamNet system. The serviceName
is then used to address ASCII messages. Each physical StreamNet device may be configured to
have some or all of its specific services enabled.
StreamNet - A technology that provides elegant solutions for streaming media & control applications
such as digital signage, distribution of HD video and audio, LAN Cloud Matrix Switching™, and
audio paging over data networks.
SubNode - A Subnode address is a part of the ASCII command address and can be a part of the
TO or FROM address. A subnode address is a special address modifier which instructs the node
where to forward the command once it is received. Typically, the subnode address indicates that
the service should forward the command to a non-StreamNet device.
T
tag - A 32-bit Intercom service session number that will be used to identify the session in the header
of the Intercom audio data and to reference it in other commands.
talkIpAdr - The IP Address to which a device should send replies to - may be Multicast or
Unicast.
talkPort - The port to which the device should send replies to.
toAddress - Specifies the name of the service, group or room to which the message is sent. The
toAddress must be immediately preceded by the “@” symbol. The Address field consists of two
parts: the node address and the subnode address.
U
UniqueID (UID) - The UID of a service is the unchangeable identifier for the service. The UID is
based on the combination of the device’s serial number and an integer that identifies the specific
service on the device. In general, there is no reason to use the UID as all services should be
assigned names and all of the user’s commands should be addressed to those service names (or
room/group names).
Unicast - A method of communication between one sender and one receiver over a network - see
Point-To-Point.
User Data Protocol (UDP) - The methods and standards used to send StreamNet ASCII messages
over the Internet to any StreamNet and StreamNet-compatible device. If addressed correctly, the
message will be routed to the desired service(s).
User Interface (UI) Service - A UI Service provides services for User Interfaces. There are
currently two types of UI services: UI/GUI and UI/Keypad. A TouchLinX hosts a UI/GUI service and
a SpeakerLinX hosts a UI/Keypad service.
V
W