ClearOne StreamNet Integration - Manual (Page 52)

G-2 Technical Support: 800-283-5936
D
Declarative - A StreamNet ASCII message command used to report information requested from
an unsolicited status report (periodic or caused by a change in a device’s state) or via a response to
an interrogative message. The most common StreamNet declarative is the #REPORT message.
E
F
Flash - A storage method/device for digital media.
fromAddress - Indicates which entity sent the message and is used to address any response that
may be generated by the message. If a response is expected, then the fromAddress should specify
the address the response should be sent to. The colon symbol “:” must precede all
fromAddress
fields.
G
General Purpose IO (GPIO) Service - The General Purpose IO service is responsible for sending
IR or RS-232 commands to devices connected to a ControLinX. The GPIO service can be thought
of as a “Miscellaneous Function” or catch-all type service category for services that don’t fit neatly
into any of the other services described.
H
I
IP Address - A network IP Address is the network address assigned to each device in a StreamNet
system and is required for sending or receiving StreamNet ASCII commands for device operation
as well as device status inquiry.
Imperative - A type of ASCII message command that initiates an action or directly causes a change
in state of a specific device.
INTERCOm Service - An Intercom Service provides one-way (Unicast) or two way (Multicast)
voice communication with other Intercom Services.
Interrogative - An ASCII message command used to request information from a particular
device.
IR - A method of remotely controlling a device without having to be physically connected to it by
sending specific commands using wireless Infrared (IR) technology.
J