ClearOne StreamNet Integration User Manual
Page 30
24
Technical Sales: 1.800.705.2103
C
ommaNd
: #level_Set balaNCe,
x
Commands a Renderer Service to Set the Balance Level.
Example: #@Room 1 Player:~UDP10.15.0.11_5000#LEVEL_SET bALANCE, x
Set the Balance Level of Audio Renderer service Room 1 Player based on the value x.
x is a number between 0 – 100.
•
x = 50 will set the balance to equal for both channels.
•
x < 50 will shift the balance toward the left channel (by decreasing the right channel).
•
x > 50 will shift the balance toward the right channel (by decreasing the left channel).
•
C
ommaNd
: #level_Set baNd_x, y
Sets the Band Level to a specific value.
x is the band indicator (1 through 5).
•
y is a number between 0 – 100.
•
y = 50 will set the BAND_1 to nominal.
•
y < 50 will decrease the BAND_1 level from nominal.
•
y > 50 will increase the BAND_1 level from nominal.
•
Example: #@Room 1 Player:~UDP10.15.0.11_5000#LEVEL_SET bAND_1, y
Commands a Renderer Service to set the BAND_1 Level.
Set the Band_1 Level of Audio Renderer service Room 1 Player based on the value of y.
C
ommaNd
: #level_Set baSS,
x
Commands a Renderer Service to Set the Bass Level.
Example: #@Room 1 Player:~UDP10.15.0.11_5000#LEVEL_SET bASS, x
Set the Bass Level of the Audio Renderer service Room 1 Player based on the value x.
x is a number between 0 – 100.
•
x = 50 will set the bass to nominal.
•
x < 50 will decrease the bass from nominal.
•
x > 50 will increase the bass from nominal.
•
C
ommaNd
: #level_Set treb,
x
Commands a Renderer Service to Set the Treble Level.
Example: #@Room 1 Player:~UDP10.15.0.11_5000#LEVEL_SET TREb, x
Set the Trebel Level of the Audio Renderer service Room 1 Player based on the value x.
x is a number between 0 – 100.
•
x = 50 will set the treble to nominal.
•
x < 50 will decrease the treble level from nominal.
•
x > 50 will increase the treble level from nominal.
•
C
ommaNd
: #level_Set vol,
x
Commands a Renderer Service to Set the Volume Level.
Example: #@Room 1 Player:~UDP10.15.0.11_5000#LEVEL_SET VOL, x
Set the Volume Level of the Audio Renderer service Room 1 Player based on the value x.
x is a number between 0 – 100.
•
x = 0 will set the volume to the minimum level.
•
x =100 will set the volume to the maximum level.
•