Serial port parameters and pin-outs, Parameters – ClearOne RS-232 User Manual
Page 7
PN: 020001
2-1
All specifications subject to change without notification. All rights reserved. Copyright © 2006 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 /
www.netstreams.com.
Chapter
2
Serial Port Parameters and Pin-Outs
There are two RS-232 connectors located on the back panel of the PAN6400 (see
Figure 2-1).
Figure 2-1
RS-232 connectors
IO1 is used to connect to the Musica™ MU5066ADC or another PAN6400. IO2 is
used to connect to a computer or other control device.
Parameters
The following parameters refer to both the IO1 and IO2 RS-232 connections:
Common Standard RS-232c
Baud Rate 9600
Data Bits 8
Stop Bits 1
Parity N
Pacing None
Hardware Handshaking None
Softwre Handshaking None