Rs-232c control – ClearOne RS-232 User Manual
Page 10
NetStreams PAN6400 RS-232 Integration Guide
3-2
PN: 020001
All specifications subject to change without notification. All rights reserved. Copyright © 2006 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 /
www.netstreams.com.
RS-232c Control
The protocol described in this document provides the following commands:
The system sends unsolicited data after any changes in the system are made. Input lines
are to be terminated with a carriage return (CR) or a CR/line feed (LF) combination.
Table 3-2
RS-232c Control
Command
Description
State
Version, Source, IR Frequency
Chang
Source, IR Frequency
Nudge
Single adjustments in one direction, Source
AllOff
All zones off commmand
AllOn
All zones on command (turns all zones on to last known state. If you need to turn on all
zones to a known source, use the ChangeSrc command.
Event
These commands control the unsolicited data subscriptions; Source (Src)
Press
These commands allow IR source and display control using RS-232.