Quoizel TF8156Z Tiffany User Manual
Page 6
Assembly Instruction Sheet #IS-TF8156Z
For Style TF8156Z
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at
6of6
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,
.
.
.
2013 QuoizelInc.
October2013
STEP 9
Make Wire Connections
-
A. Pull out the Supply Wire with Plug End and cut down it,
left 6
” cord for the Wire Connection.
B. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
C. Connect White Supply Wire from the Outlet Box to
Ribbed side from fixture.
D. Connect Black (or Red) Supply Wire from the Outlet Box
to Smooth side from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
Figure 10
White wire from supply
Ribbed side
from fixture
Black wire from supply
(or Red)
Smooth side
from fixture
Supply Wire
with Plug End
Figure 11
STEP 10 - Attach Fixture Body to Mounting
Screw
A. Place the Backplate of the Fixture Body (C) over the
Mounting Screws on the Inner Backplate (A) and secure
with Mounting Balls (B). Hand tighten until snug.
B. Assembly Shade as step 5.
C. Install bulb as step 6.
D. Install Diffuser as step 7.
Your fixture is now assembled and ready to use.
Enjoy!
Mounting Screw
Mounting Ball
Backplate
Figure 9
Inner Backplate