Quoizel TF8156Z Tiffany User Manual

Page 4

Assembly Instruction Sheet #IS-TF8156Z

For Style TF8156Z

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700

or visit us on-line at www.quoizel.com

4of6

6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com

2013 QuoizelInc.

October2013

STEP 4

Attach Cord Cover Backplate and

Cord Cover

Locate the Cord Cover Backplate (K) To position the Cord

Cover Backplate (J) measure approx 12

½ inches down

from the base of the Backplate Mark the points from the
holes on the Cord Cover Backplate (J) for Wall Anchors (H).

B. Using a portable hand drill, drill proper holes from the marks

in the wall surface for the Wall Anchors (H)

Locate the

Wall Anchors (H) and place into the holes in the wall surface

C. Place the Cord Cover Backplate (J) and match the holes with

the Wall Anchors (H)

Secure it by threading the Self-tapping

Screws (I) into the Wall Anchors (H) Hand tighten until snug.

D. Position the Supply Wire inside of the Cord Cover Backplate

(J) so that it will not be pinched. Locate the Cord Cover (K)
and secure it to the Cord Cover Backplate (J) by pressing it
over the Backplate.

Backplate

Cord Cover

Cord Cover Backplate

Wall Anchor

Supply Wire
with Plug End

Self-tapping Screw

Figure 4

STEP 5 - Install Shade

A. Attach the Shade (D) to the Socket Assembly. Pass the

Bolts on the Socket Assembly through the Small Holes
on the bottom of the Shade (D). Secure by threading the
Lock Balls (E) onto the Bolts. Hand tighten until snug.

Figure 5

Socket Assembly

Shade

Lock Ball

Bolt

Small Hole