Quoizel TF8156Z Tiffany - Manual (Page 5)

Assembly Instruction Sheet #IS-TF8156Z
For Style TF8156Z
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
5of6
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
2013 QuoizelInc. October2013
Figure 6
STEP 6 - Install Bulb
A. This fixture uses T3 Bi Pin bulb. Maximum 50 watts.
B. Insert bulb and push snugly into place.
Do not touch the bulb with bare hands use
a cloth or glove.
IMPORTANT:
Figure 7
STEP 7 Install Diffuser to Shade -
A.
Your fixture is now assembled and ready to use.
Enjoy!
Pass the Gaps on the Diffuser (I) over the Tabs on the
Shade (G) and then rotate the Diffuser (I). Do not free
your hands until the diffuser is seated onto the tabs.
Tab
Shade
Diffuser
Gap
Socket
Bulb
For Fixed Wall Mount
Figure 8
STEP 8 Install Inner Backplate -
A. ver the Outlet Box
B. Drill proper holes for Wall Anchors (H) on the marked
points on the wall surface.
C. Insert the Wall Anchors (H) into the drilled holes on the
wall surface. Attach the Inner Backplate (A) onto the
wall surface. Secure by threading Self-tapping Screws
(I) into the Wall Anchors (H). Hand tighten until snug.
Attach the Inner Backplate (A) o on
the wall surface. Mark four points on the wall surface
from the holes on the Inner Backplate (A) that you
would like to pass Self-tapping Screws (I).
Wall Anchor
Mark
Self-tapping
Screw
Inner Backplate
Outlet Box