ClearSounds TALK500 - Manual (Page 8)

8 – ENGLISH 9 – ENGLISH
Setting Speaker Volume Control
You can adjust the speaker volume for a more comfortable listening level by
sliding the
VOLUME HI/LO switch.
Dialing A Call
1. Pick up the handset or press button (the speaker LED will light) and wait
for a dial tone.
2. Press the keypad for the telephone number you wish to dial. The display will
show the number that you dialed on the keypad. If you dial a number over
14 digits long, it will show the last 14 digits only.
3. When you have completed your call, hang up the handset or press button
again to release the telephone line.
It is possible to switch from a handset conversation to a speakerphone
conversation by pressing the button and picking up or hanging up the
handset accordingly.
Pre-Dialing A Call
1. Dial on the keypad the telephone number. The telephone will voice the digits
dialed (with voice option YES) as well as display them on the LCD. To correct
a number press the
DELETE button for each incorrect digit.
2. Either a) pick up the handset, b) press the DIAL button or c) press
button.
Redial
To redial the last number called:
1. Lift the handset or press button.
2. Press the REDIAL button.
Note: The last number dialed manually (up to 32 digits long) can be redialed.
Pause
You can insert a 3.6 seconds pause into dialing or storing a number into memory
in order to access custom and telebanking services, long distance, etc. Press
REDIAL button at the desired point in number. Press REDIAL button again if
an additional 3.6 seconds is needed.
Receiving A Call
When you receive a call, the telephone rings, the Ringer LED flashes, and the
display shows the CALL# and the caller telephone number (with Caller ID service
activated), and says the name of the caller if the number matches with a name
recorded in the phone book, if not, it will say the numbers of the calling party.
This feature allows you to decide to pick up the phone or not depending on
who is calling.
If you want to talk to the caller:
1. Pick up the handset or press button to answer the call.
Talk500UserGuide.indd 8 2/4/08 5:10:22 PM