beautypg.com

ClearSounds TALK500 User Manual

Page 11

background image

10 – ENGLISH

11 – ENGLISH

-OR-

1. Pick up the handset or press button (the speaker LED will light) and wait

for a dial tone.

2. Press and release button, until icon is shown.
3. Review the stored phone number by pressing or .
4. Press

DIAL button.

Recording / Editing / Deleting Voice Prompt Of Name Of

Phonebook

With Caller ID service activated, when an incoming call is received, the unit will
display and announce the caller’s phone number. If the caller’s phone number
is stored in the phonebook, caller’s name will be displayed too.

If the voice prompt is recorded for this phone number, the unit will announce
the voice prompt recorded instead of the caller’s phone number.

1. Press and release the

MENU button until the “NAME RECORDING” is

shown.

2. Press the

DIAL button. A list of the phone book entries will be display.

3. Press or to select the list you like to record a voice or name for it.
4. To record or edit the voice, hold down

DIAL button. Speak clearly into the

microphone after a beep and “VOICE” icon flashing. Release the button
when you are finished or the unit will stop recording after 3 seconds. The
new voice prompt will then be played automatically.

Note: To delete the

voice prompt recorded, press

DELETE button while the voice prompt is

playing.

5. Repeat step 3 to 4 to edit or delete more entries or exit the set-up mode by

pressing the button.

To Edit The Phonebook Memory

1. Press and release button, icon is shown.
2. Select the required location from the phone book by pressing or .
3. Press and hold

MENU button for two seconds. The display will show

EDIT?.

4. Press

DIAL button, the first digit of the selected phone number will flash.

5. You can move the cursor to the required position by pressing or . To

delete the digit, press

DELETE button, or press any numeric key to inset

the digit and confirm with

DIAL button. Then the display shows the flashing

first letter of the name.

6. Move the cursor to the required position by pressing or . To delete

the letter, press

DELETE button, or press any numeric key to replace the

name, and confirm with

DIAL button, “SAVED!” is shown.

7. You can repeat step 2 to 6 to edit more numbers or press to exit.

To Delete the Phonebook Memory

Talk500UserGuide.indd 11

2/4/08 5:10:24 PM