Setting the voice prompt yes/no, Setting tone /pulse dialing mode, Setting ringer volume control – ClearSounds TALK500 User Manual
Page 7: Setting the handset volume control, Setting tone control (tone hi/lo)
6 – ENGLISH
7 – ENGLISH
Setting The Voice Prompt YES/NO
The telephone is factory preset with all voice features
ON. The volume of the
voice features is regulated through the
VOLUME HI/LO slide switch.
If the user does not wish to hear the voice prompts, they can turn off the voice
feature.
1
. Press and release the
MENU button until VOICE is shown.
2. Press the
DIAL button.
3. Using the or to select between
VOICE ON or OFF and confirm with
DIAL button.
4. Press button to exit the set-up mode.
Setting Tone /Pulse Dialing Mode
You can select the required dialing type
TONE/PULSE.
1. Press and release the
MENU button until TONE/PULSE is shown.
2. Press the
DIAL button.
Select the required dialing type using the
3.
or and confirm with
DIAL
button.
4. Press button to exit the set-up mode.
Setting Ringer Volume Control
The ringer sound level can be adjusted by sliding the
RINGER switch to select
HI, MID and LO level.
The red bright LED will flash with all incoming calls.
Setting The Handset Volume Control
The Boost LED is used to reflect the handset extra volume setting.
Press the
1.
button, the Boost LED will turn ON.
Increase the handset volume by rotating the
2.
knob to select the listening
level (level 1 to level 9).
During the conversation, you may turn OFF the Boost by pressing the
3.
button, the Boost LED will turn OFF and the sound level will return to
normal.
When you hang up
4.
, the phone will reset to normal sound level.
Note: Choose not to press the
button and the Boost LED will remain OFF. This
is the setting to use for people who do not require the level of amplification and tone
control offered on the phone.
Setting Tone Control (TONE HI/LO)
The Tone control allows you to fit your specific hearing needs, s
o words are
clearer and easier to understand. Slide the Tone control DOWN to boost
the lower frequency range. Slide the Tone control UP to boost the high
frequency range.
Note: The tone control function will not be effective when
the Boost LED is OFF.
Talk500UserGuide.indd 7
2/4/08 5:10:22 PM