Quoizel TFAS344VA Asheville - Manual (Page 6)

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
6of6
Assembly Instruction Sheet #IS-TFAS344VA
For Style TFAS344VA
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
2013 QuoizelInc. September2013
Figure 10
STEP 9 - Make Wire Connections
A. Un-thread the Mounting Ball (E) and slide Ceiling Canopy
(H) down.
B. Push all slack fixture wire through Ceiling Loop into Outlet
Box. Trim excess fixture wire leaving a minimum of 6 inch.
Hanging out of the Outlet Box.
C. Use standard wire connectors to make all wire connections.
(Connectors are not included with fixture.) Strip and prepare
wire ends according to instructions supplied with connectors.
D. Connect White Supply Wire from the Outlet Box to Ribbed
side Wire from fixture.
E. Connect Black (or Red) Supply Wire from the Outlet Box to
Smooth side Wire from fixture.
F. Connect Ground Wire from the Outlet Box to Ground Wire
from fixture.
G. Twist connectors until wires are tightly joined together.
H. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
I. Re-attach the Ceiling Canopy (H) as shown in Step 6.
White wire from supply Ribbed side wire from fixture
Black wire from supply
(or Red)
Smooth side wire from fixture
Ground wire from supply Ground wire from fixture
Supply Wire
and Ground
Wire
Supply Wire and
Ground Wire from
Outlet Box
Mounting
Ball
Ceiling
Canopy
Figure 9
Socket
STEP 10 Install Bulb -
A. This fixture uses standard bulb with standard screw base.
Maximum 100 watts.
B. Insert bulb and screw snugly into place.
Your fixture is now assembled and ready to use.
Enjoy!
Socket
Figure 11