Quoizel TFAS344VA Asheville - Manual (Page 3)

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
3of6
STEP 1 Install Tiffany Panels -
TWO PEOPLE ARE RECOMMENDED FOR THIS STEP.
A. Place the Bracket (O) onto a flat working surface.
Attach the Tiffany Panels (J/N) over the Bolts on the
Bracket (O) and match the holes on the Small Tiffany
Panels (J) over the Bolts on the side of the Big Tiffany
Panels (N).
B. Pass the Small Flat Washers (L) over the Bolts on the
Bracket (O) and thread the Small Wing Nut (K) onto the
Bolts to secure the Tiffany Panels (J/N). Hand tighten
until snug.
C. Secure the Small Tiffany Panel (J) to the Big Tiffany
Panel (N) by threading the Lock Balls (M) onto the
Bolts. Hand tighten until snug.
Figure 1
Assembly Instruction Sheet #IS-TFAS344VA
For Style TFAS344VA
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
2013 QuoizelInc. September2013
Big Tiffany
Panel
Small Tiffany
Panel
Bracket
Small
Wing Nut
Bolt
Bolt
Lock Ball
Small Flat
Washer
STEP 2 Install Shade -
A. Remove the Lock Washer and the Big Wing Nut from
the Socket Assembly (I).
B. Pass the Holes on the Bracket (O) over the Bolts on the
Socket Assembly (I). Secure by threading the Lock
Washer and the Big Wing Nut onto the Bolts. Hand
tighten until snug.
Big Wing Nut
Bolt
Socket
Assembly
Hole
Bracket
Figure 2
STEP 3 - Attach Crossbar to Outlet Box
A. Secure the Crossbar (A) to the outlet box with outlet
box screws (not supplied). Tighten until snug.
Outlet Box
Screw (not
Supplied)
Figure 3
Crossbar
Outlet Box
Mounting
Hole
Lock Washer