Quoizel TFAS344VA Asheville - Manual (Page 4)

Figure 4
STEP 4 Attach Nipple to Crossbar -
A. Thread one Hex Nut (D) onto the top end of the Nipple
(B).
B. Place one Lock Washer (C) over the top end of the
Nipple (B) and then thread the Nipple (B) into the center
lock hole of the Crossbar (A).
C. Using pliers, thread the hex Nut (D) against the
Crossbar (A) and hand tighten until snug.
Nipple
Crossbar
Lock Washer
Hex Nut
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
4of6
Assembly Instruction Sheet #IS-TFAS344VA
For Style TFAS344VA
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
2013 QuoizelInc. September2013
Figure 5
Crossbar
Button
Stop
Lanyard
Slot
Ceiling
Canopy
STEP 5 Attach Lanyard -
A. The purpose of the lanyard is to provide the installer a
means to support the fixture from the junction box while
connecting the electrical wires. This enables the fixture
to hang from the junction box and your hands are free to
make the wire connections.
B. Turn the Button Stop so it may be inserted into the
crossbar slot. Make sure the Button Stop is completely
inside the crossbar. Slowly release the fixture to make
sure it is supported by the Button Stop. Proceed to the
wiring steps. Once you are complete with the wiring
there is nothing to do with Lanyard. The Lanyard will
push into the junction box when the fixture is placed for
final mounting.
Figure 6
Crossbar
Mounting Ball
Nipple
Ceiling Canopy
STEP 6 Install Ceiling Canopy -
A. Place the Ceiling Canopy (H) over the Nipple (B) and
secure with the Mounting Ball (E). Hand tighten until
snug.