Quoizel VYR5008ML Voyager User Manual
Page 5
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at
5of6
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,
.
.
.
2013 QuoizelInc.
Assembly Instruction Sheet #IS-VYR5008ML
For Style VYR5008ML
STEP 8
Attach Ceiling Canopy
-
A. Pass the Ceiling Canopy (F) over the end of the Nipple
(B). Secure by threading the Knurled Nut (F) onto the
Nipple (B). Hand tighten until snug.
B. Thread the Finial (G) onto the end of Nipple (B) and
hand tighten until snug.
Figure 9
Finial
Crossbar
Nipple
Ceiling
Canopy
Knurled Nut
November 2013
STEP 7
Make Wire Connections
-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
Figure 8
White wire from supply
White wire from fixture
Black wire from supply
(or Red)
Black wire from fixture
Ground wire from supply
Ground wire from fixture
Figure 7