Quoizel KY5009IB Kyle - Manual (Page 4)

STEP 9:
a. Connect the House Ground Wire to the Fixture Ground
Wire.
b. Connect the House White (or Ribbed) Wire to the
Fixture Supply Wire (Black or Smooth Side).
c. Connect the House Black (or Red) Wire to the Fixture
Supply Wire (Black or Smooth Side).
d. Wrap each connection with approved electrical tape
and carefully stuff all of the connected wires into the
Outlet Box.
WHITE OR RIBBED
BLACK (OR RED) WIRE
GROUND WIRE
WHITE OR RIBBED
BLACK OR SMOOTH
GROUND WIRE
FROM HOUSE
FROM HOUSE
FROM HOUSE
FROM FIXTURE
FROM FIXTURE
FROM FIXTURE
Use Wire Connectors (not supplied) to connect the
wires.
INSTALLATION INSTRUCTIONS
STYLE NUMBER: KY5009IB
4 OF 5
STEP 8:
a. Thread Hex Nut (1/4 IPS Nipple) onto the end of the
Nipple and then place Lock Washer over the end of the
Nipple. Thread the Canopy Chain Loop onto the end of
the Nipple.
b. Using Pliers, thread the Hex Nut (1/4 IPS Nipple)
against the Canopy Chain Loop and tighten until snug.
c. Attach the top end of the Fixture Chain onto Canopy
Chain Loop by using Quick Link.
d. Refer to STEP 9 - Wire Connections to connect wires.
e. Push the Ceiling Canopy upward over the Outlet Box.
f. Thread the Canopy Lock Ring onto the Canopy Chain
Loop and tighten until snug to secure the Ceiling
Canopy.
Nipple
Hex Nut
(1/4 IPS Nipple)
Lock Washer
Canopy
Chain Loop
Quick Link
Ceiling
Canopy
Fixture Chain
Canopy
Lock Ring