LaMotte CHLORINE - DPD TABLET - Manual

CHLORINE - DPD TABLET
1200 COLORIMETER, 0-4 ppm
CODE 3670-01
QUANTITY CONTENTS CODE
100 *Chlorine DPD #1 Instrument Grade Tablets *6903A-J
100 *Chlorine DPD #3 Instrument Grade Tablets *6197A-J
1 Colorimeter Tubes, w/caps,set of 6 0290-6
1 Water Sample Collecting Bottle 0688
1 1200 Colorimeter for Chlorine DPD 26728
*WARNING: Reagents marked with an * are considered to be potential health hazards.
To view or print a Material Safety Data Sheet (MSDS) for these reagents go to
www.lamotte.com. To obtain a printed copy, contact LaMotte by e-mail, phone or fax.
To order individual reagents or test kit components, use the specifi ed code number.
INTRODUCTION
Chlorine is added to water to kill bacteria and other disease-producing organisms,
control algae, and remove undesirable odors and colors. Chlorine added to water
quickly forms hypochlorous acid, HClO, also known as Free Available Chlorine, the
active ingredient responsible for chlorine*s sanitizing capabilities. Free Available
Chlorine combines with impurities in the water to form chloramines and other organic
nitrogen compounds. In combined form, its sanitizing capability diminishes, and
higher levels of chlorine are necessary to achieve effective sanitation.
Therefore, it is essential to chlorinate to the point of establishing a Free Available
Chlorine Residual, and then to maintain that residual at a recommended level. The
LaMotte DPD tablet test method distinguishes levels of Free Available Chlorine,
Combined Chlorine, and Total Residual Chlorine, using a single test sample.