LaMotte DETERGENT TEST KIT DS-1-DC - Manual

DE TER GENT TEST KIT
MODEL DS-1-DC • CODE 4507-01
QUANTITY CONTENTS CODE
2 x 30 mL *DS Indicator Reagent *4508-G
15 mL DS Reference Solution 4513-E
50 g pH Adjustment Powder 4509-H
1 Test Tube, Test Sample w/cap 0282
1 Test Tube, Reference Sample w/cap 0283
1 Test Tube, 1-8 mL, plastic, w/cap 0755
1 Pipet, glass 0347
1 Spoon, 0.25 g, plastic 0695
*WARNING: Reagents marked with an * are considered to be potential health
hazards. To view or print a Material Safety Data Sheet (MSDS) for these
reagents go to www.lamotte.com. To obtain a printed copy, contact LaMotte by
e-mail, phone or fax.
To order individual reagents or test kit components, use the specified code
number.
PRO CE DURE
STEP I - Determine if Detergent is Present
1.
Use the calibrated test tube (0755) to measure 5 mL of the sample
solution. Add to the screw cap tube marked Test Sample (0282).
2. Use the 0.25 g spoon (0695) to add one measure of pH Adjustment
Powder (4509). Shake until dissolved.
3. Fill the pipet (0347) with *DS Indicator Reagent (4508) by squeezing
the rubber bulb, then inserting pipet into reagent. Add this amount of
*DS Indicator Reagent to the Test Sample tube. Cap and shake for one
minute.
4. Al low the tube to stand un til the two lay ers of the so lu tion sep a rate. The
wa ter layer will set tle to the bot tom and the re agent layer will rise to the
top. Use chart be low to de ter mine if de ter gent is pres ent.
L Mott
WARNING! This set contains chemicals
that may be harmful if misused. Read
cautions on individual containers
carefully. Not to be used by children
except under adult supervision