CITIZEN iDP3410 User Manual
Page 45
iDP3410 User's Manual
31
CITIZEN
11. DRAWER KICK-OUT CONNECTOR AND POWER CONNECTOR
11.1 Specifications of Drawer Kick-Out Connector
(1) Drawer kick-out drive signal
Parallel
Interface ----- Can be learned at the no. 34 pin of the interface connector
Serial Interface ----- Provided with a command to learn the status in the Star and ESC/POS modes.
(2) Electrical characteristics
1) Drive voltage: 24 V DC
2) Drive current: 0.8 A at maximum(Within 510 ms)
3) Switch signal: Signal level
"L" = 0
∼
0.5 V
"H" = 3
∼
5 V
11.2 Connector's Pin Configuration
No.
Signal
Function
1
FG
Frame Ground
2
DRAWER 1
Drawer 1 drive signal
3
DRSW
Drawer switch input
4
VDR
Drawer drive power
5
DRAWER 2
Drawer 2 drive signal
6
GND
Common ground on the circuit
Connector used
: TM5RJ3-66 (HIROSE)
Applicable connector
: TM3P-66P (HIROSE) or equivalent
CAUTION
:
•
No output is made while printing.
•
The drawers 1 and 2 cannot be driven simultaneously.
•
A solenoid used for the drawer should be of 36
Ω
or more. An output current should be
kept below 0.8 A. Use beyond this limit cannot be assured.
•
This connector cannot be connected to a telephone line. Do not connect other than the
solenoid.
11.3 Drive Circuit