CITIZEN CL-S700R - Manual (Page 48)

2
Printer Operation
48
Top Menu Sub Menu Default Menu Remarks
Media Power Up Off On Selects whether or not to initiate media
Off measurement when the power in ON.
CI Lock Off On Activates/deactivates the CI command.
Off
Emulation Select ZPI2 DM4 Selects DataMax ® /Zebra ® compatibility
[Emulation Sel] DMI DM4: DataMax ® 400
DPP DMI: DataMax ® IClass
ZPI2 DPP: DataMax ® Prodigy Plus ®
ZPI2: Zebra ® 2844Z
Emulation Auto On On Setting emulation (as above) auto detection.
Detect Off
[Emulation Auto] Full Auto
After Print AutoConfigure On On Automatically configures optional devices.
[Auto Config] Off On .... AutoConfigure enabled (Regardless of
whether Function Select is set, if a
peeler or cutter is installed, each mode
is set automatically.)
Off ... AutoConfigure disabled (A peeler of
cutter is installed, but to not operate
the peeler or cutter, turn it Off and the
operation is selected by
Function Select.)
Function Select Tear Off Selects the operation when the
[Function Sel] Tear AutoConfigure is set to Off. Designates the
Peel On* paper position based on each option. The
Cut On** operation of this device is enabled during
Rewind*** selection. At the same time, the parameters of
the f command of Prodigy Plus are emulated
for each optional device.
Cutter Type Standard Standard Selects the cutter type.
Heavy Duty Standard: Model JN98901
Heavy Duty: Model JN98911
Cutter Action Backfeed Backfeed Sets the cutter action.
Through With the optional AutoConfigure On, printing
is executed only when the cutter is installed
or only when Cut is selected by Function
Select.
Backfeed is always set after cutting.
Through is set at the rear end of sheets 1 to
n-1 when the number of copies = n, and the
rear end of the final page of single sheet and
the copy is backfeed.
Rewinder Auto Off On [CL-S700R only]
Online*** Off Sets the Rewinder Auto Online.
[Rew Auto Online] In the case in which the setting is On, when
the Rewinder Open Error occurs, if the
Rewinder Cover is closed, it will automatically
return to Online and printing will restart.
Rewinder Online 2 sec 1 to 10 sec [CL-S700R only]
Delay*** Sets the Rewinder Online Delay.
[Rew OnlineDelay] Sets the time until the Rewinder restarts after
the Rewinder Cover is closed when the above
Rewinder Auto Online is On.
Rewinder Torque*** 4 1 to 7 [CL-S700R only]
Sets the Rewinder Torque.
Peel Wait Delay** 0.1 sec 0.1 to 2.0 sec Sets the Peel Wait Delay.
Displays only machines with a peeler
installed.
* Only when peeling option is mounted.
** Only when cutter is mounted.
*** Only the Rewinder.
Mode Settings
[Zebra
® Emulation]