47 printer operation, 7 zebra, Emulation mode settings [zebra – CITIZEN CL-S700R User Manual
Page 47: Emulation

47
Printer Operation
7 Zebra
®
Emulation
Mode Settings
[Zebra
®
Emulation]
Top Menu
Sub Menu
Default
Menu
Remarks
Page Setup
Print Speed*
7 IPS
2 to 10 IPS
[For CL-S700/CL-S700R]
Printing speed setting.
7 IPS
2 to 8 IPS
[For CL-S703]
Printing speed setting.
Print Darkness
12
00 to 30
Adjusting print darkness.
Darkness Adjust
00
-10 to 10
Fine adjustment of darkness commands.
[Darkness Adj]
Print Method
TT
TT (Thermal Transfer) Selection of Thermal Transfer (ribbon) or
DT (Direct Thermal)
Direct Thermal.
Continuous Media
4.00 inch
0.25 to 32.00 inch
Setting media length of continuous media.
Length
101.6 mm
6.4 to 812.8 mm
Lower level = during mm mode.
[Cont Media Len]
Vertical Position
0.00 inch
-1.00 to 1.00 inch
Adjusting printing start position.
[Vertical Pos]
0.0 mm
-25.4 to 25.4mm
Horizontal Shift
0.00 inch
-1.00 to 1.00 inch
Adjusting horizontal image position.
[Horizontal Shif]
0.0 mm
-25.4 to 25.4mm
Sensor Select
Rear Adj Sensor Rear Adj Sensor
Selecting front fixed/rear adj. sensor.
Front Fixed Sen
Media Sensor
See Through
See Through
Selecting media sensor.
Reflect
None
Small Media
Off
On
Setting for small media.
Adjustment
Off
[Small Media Adj]
Small Media
1.00 inch
0.25 to 1.00 inch
Setting media length for small media.
Length
25.4 mm
6.4 to 25.4mm
[Small Media Len]
Symbol Set
PM
50 symbols
Setting symbol set.
System Setup
Sensor Monitor
–
–
Displays level of sensor that is currently
selected.
Sensor Level
1.4 V
0.0 V to 3.0 V
Selects threshold of the sensor.
Paper End Level
2.80 V
0.01 V to 3.00 V
Sets the paper end level.
Error Reporting
On Printing
On Printing
Setting for error report.
[Error Report]
Immediate
Cover Open Sensor
Off
On
Sets the cover open sensor.
[Cover Sensor]
Off
Buzzer Select
Exec/Err
Exec/Err
Setting buzzer sounding conditions.
All
Error
Key
None
Metric/Inch
Inch
Inch
Sets the units.
[Metric/Inch Sel]
mm
Max Media Length
10.00 inch
1.00 to 50.00 inch
Sets the maximum media length.
[Max Media Len]
254.0 mm
25.4 to 1270.0 mm
Settings Lock
Off
On
Prevents a command changing the set value.
Off
Keyboard Lock
Off
On
Prevents a change by a key operation.
Off
Note: Hold down the Menu Key for at least 4
seconds to enter the Menu Setup Mode when
setting the “On” menu.
* 2 to 7 IPS for CL-S700/CL-S703 with optional peeler.