Waring CB15VSF - Manual (Page 16)

16
Container – The stainless steel container can be sterilized
without injury to the bearing.
Container pad is to be washed and rinsed in solutions as
noted in the separate Cleaning and Sanitizing Instructions.
Depending on the operating conditions, service life of the
main components of the container blade assembly, socket
head shaft and shaft seals is 500 hours actual running time.
When any one of these main components has worn to the
extent that replacement is required, it is likely that the other
components will need to be replaced also. It is therefore
recommended that container blade assemblies be replaced
as a unit.
Die-cast lock nut must be tightened securely (65 to 70
foot-pounds torque) when reassembling container.
Power Supply Cord – The power supply cord should not be
replaced by the end user. The power supply cord should be
replaced only by the manufacturer’s authorized importer
(or, in the United States and Canada, by an authorized
Service Center).
Note: All parts require constant monitoring for conditions
requiring replacement. For assistance, contact your nearest
Service Center.
LIMITED THREE-YEAR MOTOR WARRANTY
LIMITED TWO-YEAR WARRANTY
Waring warrants every new Waring ® Commercial Blender
to be free from defects in material and workmanship for a
period of two years from the date of purchase when used
with foodstuffs, nonabrasive liquids (other than detergents)
and nonabrasive semi-liquids, providing it has not been
subject to loads in excess of the indicated rating. In addition,
the motor in this appliance has a full three-year warranty.
Under this warranty, Waring, during the warranty period, will
repair or replace any part which, upon our examination, is
defective in materials or workmanship, provided the product
is delivered prepaid to the Waring Service Center at: