Viking Pump TSM280: Duralobe (Discontinued) User Manual

Page 45

Text mode
Original mode

Page : 43

4.2.4 Gearbox Cover Assembly

see Fig 25.

Install lipseal (11) to gearbox cover (16).

Install breather (21), drain plug (5) and sight glass (6) in required
position in gearbox cover (16).

Note: The sight glass (6) must be Installed in the upper tapped hole in
the side of the gearbox cover (16). Remember to fill the gearbox with oil
prior to start up. For recommended lubricant capacities and grades
refer to section 5.3.

Install gearbox cover (16) with gasket (3) to rotorcase (40) securing
with screws (7), tightening to the correct torque, refer to section 5.2.

Fig 25

WARNING