Clarinet Systems EthIR LAN User Manual
Page 60
F-10
4.
Your notebook is now configured for Direct Cable Connection. Do not
click Close
. Rather, MINIMIZE the dialog unless you wish to terminate the
connection.
Connecting to and Disconnecting from the Network
The ClarinetIR software allows you a simple point and click solution to get
connected with DCC. If this software is not available then the following
instructions can help you achieve the same goal:
To connect the notebook to the network using Direct Cable Connection:
1. Face your notebook infrared port directly toward any EthIR Beam
connected to the EthIR Switch.
2. Establish a remote connection by running DCC from the Start menu or
desktop shortcut. A window pops up to display the status of the
connection.
3. With your configured settings in place a dialog appears asking you to
Connect
as Guest on COM4. Click Connect.
4. Another window will ask for the host computer name. Choose Cancel.