Triton SJA 300 User Manual

Page 11

4. Fit either the roller support (as shown in Fig 22) or standard

support (as shown in Fig 23) to the correct side of the extension

bar

5. Rotate the securing clamp lever of the support so there is

sufficient play to lock the clamp lever and secure the support in

place on the extension bar

6. Adjust the height of the support by rotating the securing clamp

lever and adjusting the height, then tighten at the required

height position

7. Re-fit plastic end pieces to the extension bar if required, and re-

fit the Phillips screw in each end. The plastic end pieces prevent

supports from coming off the extension bar, and also cover the

metal ends

Note: The extension bars can be used without use of the plastic

end caps, which means it will not be necessary to carry a Phillips

screwdriver with Superjaws.
Caution: The extension bars and supports are not rated to the

same 250kg capacity as SuperJaw’s frame. Do not overload

the extension bars. For heavy workpieces ensure the weight is

centralised on the main frame of SuperJaw. If necessary, move

the support closer to the frame on the extension bar. Use multiple

extension bars and supports when extra strength is required.
Notes:
• It is advisable, when using larger workpieces, or where the

supports need to be at a measured distance , to always use bar

clamps to prevent the extension bars from moving

• Fit the roller support the correct way to allow the bar stop to

come up correctly behind the roller during use, as shown in Fig

• Make sure SuperJaws does not become unbalanced with the

accessories fitted. If necessary, secure the feet of SuperJaws to

a surface using the holes in the front feet, as shown in Fig 19

• If the central pin (as indicated in fig 25) in a securing clamp

lever comes loose, unlock the securing clamp and unscrew the

clamp so the pin can be re-fitted correctly. Do not try to use the

clamp if the pin is not correctly fitted in the lever

• The clamping mechanism position can be moved to an

alternative side of the extension bar, which may make it easier

to clamp and unclamp, depending on use and workpiece

• Always remove accessories before folding and transporting

SuperJaws

Check with your Triton stockist for other accessories for SuperJaws

Optional Accessories

SJA300_Z1MANPRO1.indd 10

12/08/2014 14:54