Trail Master Suspension TM102N GM 1500 4WD/2WD SUSPENSION 4 LIFT KIT - Manual (Page 5)

5
TM102N
Revised
2.4.14
12. Unbolt the OE CV axle from the differential.
Rest the CV axle on the lower control arm.
NOTE: Be very careful not to overextend
the CV axle during removal.
13. Using the proper tool carefully separate the
upper ball joint from the knuckle. Loosen but
DO NOT remove the retaining nut from the
upper ball joint.
14. Unbolt the previously loosened upper ball
joint retaining nut.
15. Remove the clips that hold the ABS wire to
the upper strut mounting studs.
16. Support the lower control arm with a jack and
unbolt the lower strut mounting bolts from the
lower control arm mount.
17. Unbolt the nuts on the upper strut mounting
studs. Carefully remove the strut from the ve-
hicle.
OE Strut
Hardware
OE
Strut
OE Strut
Studs
OE Wire
Clip
OE Upper
Ball Joint
OE
Strut
OE
CV Axle
Differential
Flange
OE Sway
Bar End
Link
OE Sway Bar
OE Sway Bar
End Link
Hardware