Introduction, Connect and power your devices – Teradek Bond User Manual

Page 2

Version 2.0 Jun

Page | 2

Introduction

Thank you for purchasing the Teradek Bond. Bond allows you to stream video from a Cube encoder over

up to five cellular modems for live broadcasting from any location with cell coverage. Set up involves

installing and running Sputnik (detailed in the separate Sputnik Installation and Configuration Guide),

and following the three main steps outlined in this guide.







For more information about the available configuration options, please refer to the Cube Reference

Guide available on the USB drive included with Cube.

Connect and power your devices

1. Getting started

1. Begin by connecting t

he included USB cable between Cube‟s USB port and the mini-B USB port

on Bond.

Bond back plate:

Cube back plate:

2. To power Bond, connect the included AC adapter (or accessory power cable, sold separately) to

Bond via the 2

pin LEMO connector marked „6-28 DC Input.‟

Bond front plate: