Network configuration and status leds – Teradek Bond User Manual
Page 11
Version 2.0 Jun
‟12 © Teradek, LLC 2012. All rights reserved.
Page | 11
Network Configuration and Status LEDs
Bond‟s network configuration is located under the „Teradek Bond‟ tab on the „Network‟->‟Configuration‟
page.
For most users, Bond‟s network configuration should be left to „Auto‟ for all 5 Ports when using officially
supported modems. Each port in „Auto‟ mode will detect and initialize any supported modem when it is
plugged in so that a variety of modems can be used interchangeably.
To manually configure each of Bond‟s modem ports, simply select your modem from the drop down list
under „Configuration.‟ This is useful if, for example, you wanted to restrict your Bond to only work with a
particular modem (for usage reasons or otherwise).
If your modem is currently available in the Configuration drop down, you may still be able to enable it
using the „Custom‟ modem option. When „Custom‟ is selected, a window pops up to allow manual
configuration of your modem.