tekmar 742 Actuating Motor - Manual (Page 7)

© 2013 742_D - 10/13
7 of 8
Technical Data
Actuating Motor 742 0-10 V (dc)
Literature 742_C, 742_D
Packaged weight 1.1 lbs (500 g)
Dimensions 3-5/8" H x 3-1/8" W x 3-9/16" D (93 x 80 x 90 mm)
Enclosure Polycarbonate plastic, NEMA type 1
Ambient conditions
Indoor use only, 32 to 122°F (0 to 50°C), 95% RH non-
condensing
Power supply 24 V ± 10% (ac/dc), 2.5 VA, Class 2
Control signal input
0-10 V (dc) or 2-10 V (dc), selected by switch setting,
100 kΩ maximum input impedance
Position signal output
0-10 V (dc) or 2-10 V (dc), follows switch setting,
3 kΩ maximum load impedance
Angle of rotation
Electrically limited to 90° shaft rotation, clockwise or
counterclockwise direction selected by switch setting
Motor speed 140 seconds
Rated torque 88 in•lbs (10 N•m)