beautypg.com

Technical data – tekmar 012 Adaptor Plate User Manual

Page 3

background image

© 2013

012_D - 03/13

3 of 4

A Watts Water Technologies Company

Technical Data

Adaptor Plate 012 for Enclosure S

Literature

012_C, 012_D

Packaged weight

0.1 lb. (50 g)

Dimensions

4-3/4” H x 3-15/16” W x 3/16” D (120 x 100 x 4.3 mm)

Enclosure

White PVC plastic, NEMA Type 1

Ambient conditions

Indoor use only, -20 to 120°F (-30 to 50°C)

–Included

Two #6 x 1/4” self-tapping screws, two #6-32 x 1” machine screws,
two #6 x 1” wood screws and two drywall anchors

Adapter

Plate 012

Wall

Thermostat

Front

Thermostat

Base

If mounting directly to the wall:

Drill holes and install the wall anchors.
Feed the wiring through the large hole in the adaptor plate.
Using the 1” wood screws, fasten the adaptor plate to the wall by driving the
screws into the wall anchors.
Using the 1/4” self tapping screws, fasten the thermostat base to the adaptor
plate.
Terminate wiring to the wiring strip.
Push the thermostat front onto the thermostat base.