tekmar 013 24 V (ac) Transformer - Manual (Page 2)

© 2014 013_D - 07/14
2 of 4
Installation
Check the Contents
Check the contents of this package. If any of the contents listed are missing or
damaged, please refer to the Limited Warranty and Product Return Procedure on
the back of this brochure and contact your wholesaler or tekmar sales representative
for assistance. Type 013 includes:
Read this Manual BEFORE using this equipment.
Failure to read and follow all safety and use information can result in
personal injury, property damage, or damage to the equipment.
Keep this Manual for future reference.
Preparation
Choose the placement of the 24 V (ac) early in the construction process to
enable proper wiring during rough-in.
Consider the following:
Keep dry. Avoid potential leakage onto the control.
No exposure to extreme temperatures beyond 32-122°F (0 to 50°C).
Easy access for wiring. •
•
•
Installation Location ------------------------------------------------- -------------------------------------------------
Tools Required ------------------------------------------------------ ------------------------------------------------------
Disconnect all power before opening the device.
Improper installation and operation of this device could result in damage
to the equipment and possibly even personal injury or death. •
•
It is the installers responsibility to ensure that this device is safely
installed according to all applicable codes and standards. tekmar
is not responsible for damages resulting from improper installation
and/or maintenance.
One 24 V (ac) Transformer 013 • One Installation & Operation Manual 013_D •
Materials Required -------------------------------------------------- --------------------------------------------------
2 conductor, 18 AWG LVT solid wire
2 conductor with ground, 14 AWG cable
•
•
Wood screws
Wire nuts
•
•
Phillips screwdriver • Wire Stripper •