SWIT Electronics S-1092H - Manual (Page 5)

2. Panel Instruction
Front view
⑴ MENU：Press to enter Menu
⑵ DISPLAY：Display current settings
Press “Display” to display or shut off relevant status information
⑶ ZOOM: Press “ ZOOM” to switch on/off the zoom function.
⑷ SOURCE：Press“SOURCE”to select SDI1、SDI2、HDMI、CVBS signal input
⑸～⑻ User definable function keys
Press and hold F1/F2/F3/F4, it will display the current definitions of the 4 function keys.
⑼ ENTER/VOL：Select and Apply
Under menu system, revolve “ENTER/VOL” to adjust settings and press to apply;
Out of menu system, revolve “ENTER/VOL” to adjust volume, and press “ENTER/VOL” to mute.
⑽ BRIGHT: Revolve “BRIGHT” to adjust brightness value from 0～100. Default: 50.
⑾ CONTRAST：Revolve “CONTRAST” to adjust contrast value from 0～100. Default: 50.
⑿ SATURATION：Revolve “SATURATION” to adjust saturation value from 0～100. Default: 50.
⒀ POWER：Power on/off
Connect with power cable, press the “POWER” to switch on the monitor. Press again to switch off.
Disconnect with power cable or battery if the monitor will not be used for a period of time.
⒁ TALLY Light: Red, Green and Yellow 3-color TALLY indicator
⒂ PHONE：3.5mm earphone socket, for SDI/HDMI embedded audio and analog audio monitoring.