Stealth Cam STC-IR1 - Manual (Page 22)

STC-IR1
www.stealthcam.net Toll Free 877-269-8490
22
Note: In order to obtain proper weather resistance, please make
sure that both door latches are securely locked in place.
Testing the cameras coverage area
One of Stealth Cam's many features is the ability to test the coverage
area.
o After mounting the camera; open front housing & slide the
power switch to ON
o After the front LCD screen has powered ON, press the TEST
button. (This must be done with in 30 seconds or the camera
will enter detection mode).
o Close the front housing.
o Walk around in front of the camera to see if you have mounted
camera in the proper position. A green indicator light will blink
on the front housing when you have intruded the coverage area.
o Adjust the camera position as needed & repeat testing until the
desired coverage area is achieved.