Stealth Cam STC-IR1 - Manual (Page 13)

STC-IR1
www.stealthcam.net Toll Free 877-269-8490
13
Set up and Programming
Familiarize your self with the location of the different buttons before
programming the camera settings as it is helpful to look at the front LCD
display while performing the various functions.
Setting the continuous capture program
Continuous capture is the number of images the camera will record
each time the PIR coverage area is intruded.
Note: Allow 3 seconds between pressing MENU button when
navigating through the setting modes.
o Open the housing.
o Move the ON / OFF switch to ON. It will take approximately 5
seconds for the camera to power ON. After the camera has
powered ON you have 30 second to begin programming before
the camera enters detection mode.
o Once the camera has powered ON the LCD display on the front
housing will read as illustrated in
figure 1.
PIR on the display indicates the PIR (Passive Infrared Motion Sensor)