Clarion DRX9675z - Manual (Page 10)

DRX9675z
19 18
DRX9675z
CD Changer Operations
CD Changer Operations
8. OPERATIONS OF ACCESSORIES
CD changer functions
When an optional CD changer is connected
through the CeNET cable, this unit controls all
CD changer functions. This unit can control a total
of 2 changers (MD and/or CD).
Press FUNCTION button 7 and select the CD
changer mode to start play. If 2 CD changers are
connected, press FUNCTION button
7 to select
the CD changer for play.
∗ If “NO MAG” appears in the display, insert the
magazine into the CD changer. “LOADING”
appears in the display while the player loads
(checks) the magazine.
∗ If “NO DISC” appears in the display, eject the
magazine and insert discs into each slot. Then,
reinsert the magazine back into the CD changer.
CAUTION
CD-ROM discs cannot be played in the CD
changer.
Pausing play
1. Press Play/pause button $ to pause play.
“PAUSE” appears in the display.
2. To resume play, press Play/pause button $
again.
Displaying CD titles
This unit can display title data for CD-text CDs
and user titles input with this unit.
1. Press DISP button 3 to display the main
display.
2. Each time you press and hold DISP button
3 for 1 second or longer, the title display
changes in the following order:
User title (disc) ➜ CD-text title (disc) ➜ CD-
text title (artist) ➜ CD-text title (track) ➜ user
title (disc)...
Note:
• If the CD playing is not a CD-text CD or no user
title has been input, “----------” appears in the
display.
● Scrolling a CD-text title
You can scroll the display as follows.
∗ When set “A-SCROLL” to “ON”.
The title is automatically kept scrolling.
∗ When set “A-SCROLL” to “OFF”.
1. Display the CD-text title (disc, artist or track).
2. Press and hold TITLE button # for 1 second
or longer. The title scrolls.
Selecting a CD
Each of the Direct button " corresponds to a
disc loaded into the magazine.
● Selecting a disc from 1 to 6
1. Press the Shift button ! to display the disc
display 1 to 6.
2. Press the corresponding Direct button (1 to
6) " to select the desired disc.
● Selecting a disc from 7 to 12 (only when a
12 disc CD changer is used.)
1. Press the Shift button ! to display the disc
display 7 to 12.
2. Press the corresponding Direct button (7 to
12) " select the desired disc.
∗ If a CD is not loaded in a slot of the magazine,
pressing Direct button
" corresponding to its
disc number is invalid.
Selecting a track
● Track-up
1. Press the right side of SEARCH button 4 to
move ahead to the beginning of the next track.
2. Each time you press the right side of SEARCH
button 4 , the track advances ahead to the
beginning of the next track.
● Track-down
1. Press the left side of SEARCH button 4 to
move back to the beginning of the current track.
2. Press the left side of SEARCH button 4 twice
to move to the beginning of the previous track.
Fast-forward/fast-backward
● Fast-forward
Press and hold the right side of SEARCH button
4 for 1 second or longer.
● Fast-backward
Press and hold the left side of SEARCH button
4 for 1 second or longer.
Top function
The top function plays from the first track (track
No. 1) of the disc.
● When playing a disc 1 to 6
1. Press the Shift button ! to display the disc
display (1 to 6).
2. Press Direct button " (1 to 6) with the same
number as the CD playing.
● When playing a disc 7 to 12 (only when a
12 disc CD changer is used.)
1. Press the Shift button ! to display the disc
display (7 to 12).
2. Press Direct button " (7 to 12) with the same
number as the CD playing.
∗ If a CD is not loaded in a slot of the magazine,
pressing Direct button
" corresponding to its
disc number is invalid.
Scan play
The scan play locates and plays the first 10
seconds of each track on a disc automatically.
This function continues on the disc until it is
cancelled.
∗ The scan play is useful when you want to select a
desired track.
1. Press the Shift button ! to display the
subdisplay.
2. When you press the SCN button " , scan play
starts. “SCN” lights in the display.
3. To cancel scan play, press the SCN button "
again. “SCN” goes off from the display and
the current track continues to play.
Disc scan play
The disc scan play locates and plays the first 10
seconds of the first track on each disc in the
currently selected CD changer. This function
continues automatically until it is cancelled.
∗ The disc scan play is useful when you want to
select a desired CD.
1. Press the Shift button ! to display the
subdisplay.
2. When you press the D.SCN button " , disc
scan play starts. “D.SCN” lights in the display.
3. To cancel disc scan play, press the D.SCN
button " again. “D.SCN” goes off from the
display and normal disc play contunues on
the current track.
Repeat play
The repeat play continuously plays the current
track. This function continues automatically until
it is cancelled.
1. Press the Shift button ! to display the subdisplay.
2. When you press the RPT button " , repeat
play starts. “RPT” lights in the display.
3. To cancel repeat play, press the RPT button "
again. “RPT” goes off from the display and the
unit returns to normal play.
Disc repeat play
After all tracks in the current disc have been
played, the disc repeat play automatically replays
the current disc over from the first track. This
function continues automatically until it is
cancelled.
1. Press the Shift button ! to display the
subdisplay.
2. When you press the D.RPT button " , disc
repeat play starts. “D.RPT” lights in the
display.
3. To cancel disc repeat play, press the D.RPT
button " again. “D.RPT” goes off from the
display and the unit returns to normal play
from the track being played.
Random play
The random play selects and plays individual
tracks on the disc in no particular order. This
function continues automatically until it is
cancelled.
1. Press the Shift button ! to display the
subdisplay.
2. When you press the RDM button " , random
play starts. “RDM” lights in the display.
3. To cancel random play, press the RDM button
" again. “RDM” goes off from the display and
the unit returns to normal play.
Disc random play
The disc random play selects and plays individual
tracks or discs automatically in no particular
order. This function continues automatically until
it is cancelled.
1. Press the Shift button ! to display the
subdisplay.
2. When you press the D.RDM button " , disc
random play starts. “D.RDM” lights in the
display.
3. To cancel disc random play, press the D.RDM
button " again. “D.RDM” goes off from the
display and the unit returns to normal play
from the track being played.