Sound Devices 722 - Manual (Page 63)

722 User Guide and Technical Information
61
Setup Menu
The setup menu controls a wide range of parameters for the 722, including all audio routing and re-
cording settings. The setup menu is a single, flat architecture with no sub-menus, easing navigation.
Each setup controls a specific parameter with several selections. The chart below shows the setup
number, a description of the control, and the menu options available.
# Setup Name Setup Description Setup Options
1 Quick Setup Allows the user to quickly apply default menu setups
and save/retrieve user setups to disk or CF.
• Load Factory Settings
- restores the factory default settings
• Load Film Settings
- applies typical setups for film production
• Load Reporter Settings
- applies typical setups for voice recording
• Load Music Settings
- applies typical setups for music recording
• Load User from INHDD
- applies settings saved by user to hard disk
• Load User from CF
- applies settings saved by user to CF
• Save User to INHDD
- saves present state to file on hard drive
• Save User to CF
- saves present state to file on CF
2 FireWire: Connection Activates FireWire drive mode. • Computer/Connect (STOP+HDD buttons)
• External Drive
3 Rec: Sample Rate Sets the audio sampling frequency of the 722 • 32 kHz
• 44.1 kHz
• 47.952 kHz
• 47.952k F
• 48 kHz
• 48.048 kHz
• 48.048k F • 88.2 kHz
• 96 kHz
• 96.096 kHz
• 96.096 k F
• 176.4 kHz
• 192 kHz
4 Rec: Bit Depth Sets the bit depth of the 722 recordings. • 16 bit,
• 24 bit
5 Rec: File Type Selects the file format (type) recorded to the selected
medium.
• .wav poly
• .wav mono
• .flac
• .MP3 32 kb/s
• .MP3 64 kb/s
• .MP3 96 kb/s
• .MP3 128 kb/s
• .MP3 160 kb/s
• .MP3 192 kb/s
• .MP3 256 kb/s • .MP3 320 kb/s
• .MP2 64 kb/s
• .MP2 96 kb/s
• .MP2 128 kb/s
• .MP2 160 kb/s
• .MP2 192 kb/s
• .MP2 256 kb/s
• .MP2 320 kb/s
• .MP2 384 kb/s
6 Rec: Media Select Selects the storage media used for recording. Media is
selectable even if it is not present.
• INHDD Only
• CF Only
• EXHDD Only • INHDD and CF
• EXHDD and INHDD
• EXHDD and CF
• EXHDD and INHDD and CF
7 Rec: Scene Name/Number User-defined, alpha-numeric file scene names can be pre-set
and selected from a list. Scene name lists can be saved to
hard drive.
entered for the scene name>
Scene name can also be left blank
8 Rec: Track Names used to identify a track name which shows up in iXML
and BWF metadata
• Track A
• Track B
• Track C
• Track D
• Mix
• Boom
•
•
•
9 Rec: Take Name/Number Numeric, auto-incrementing number used for take
identification. 32000, with or without preceding 0’s>