Sound Devices 702 - Manual (Page 62)

702 User Guide and Technical Information
60
v. 2.67 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
# Setup Name Setup Description Setup Options
5 Rec: File Type Selects the file format (type) recorded to the
selected medium.
• .wav poly
• .wav mono
• .flac
• .MP3 32 kb/s
• .MP3 64 kb/s
• .MP3 96 kb/s
• .MP3 128 kb/s
• .MP3 160 kb/s
• .MP3 192 kb/s
• .MP3 256 kb/s • .MP3 320 kb/s
• .MP2 64 kb/s
• .MP2 96 kb/s
• .MP2 128 kb/s
• .MP2 160 kb/s
• .MP2 192 kb/s
• .MP2 256 kb/s
• .MP2 320 kb/s
• .MP2 384 kb/s
6 Rec: Media Select Selects the storage media used for recording.
Media is selectable even if it is not present.
• CF Only
• EXHDD Only
• EXHDD and CF
7 Rec: Scene Name/Number User-defined, alpha-numeric file scene names
can be pre-set and selected from a list. Scene
name lists can be saved to hard drive.
for the scene name>
Scene name can also be left blank
8 Rec: Track Names used to identify a track name which shows up
in iXML and BWF metadata
• Track A
• Track B
• Track A
• Track B • Mix
• Boom
•
•
•
9 Rec: Take Name/Number Numeric, auto-incrementing number used for
take identification. with or without preceding 0’s>
10 Rec: Take Reset Mode Defines when take numbers are reset. Reset
brings take number to <1>.
• Never
- take numbers do not reset
• When scene is changed
- take resets when scene name is changed
• When daily folder changes
- takes reset on new day
• Either scene or daily
- takes reset on either change
11 Rec: Pre-Roll Time Selects the amount of pre-roll time the 702 will
add to the beginning of each file.
0–10 sec. @ 48 kHz
0–5 sec. @ 88.2–96.096 kHz
0–2 sec. @ >96.096–192 kHz
12 Rec: Dither Selects whether to dither is added to 24 bit
digital signals while recording 16 bit files.
• Off
• On (16 bit only)
13 Rec: Timer Start Sets a specific start time/date for unattended
recording. Unit must be powered.
14 Rec: Timer Stop Set a specific time/date to stop recording.
May be used with or without the Rec: Timer
Start. May be set before the Timer Start time
to temporarily stop recording and then resume
recording with Timer Start.
15 Rec: Record Indicator Sets how the large display looks when the unit
enters record.
• Normal Numbers
• Reverse Numbers
• Flash Numbers
16 Rec: Record Pause Allows a recording to be stopped then
continued without creating a new take or file.
Time Code Mode must be set to Off to enable
Record Pause.
• Disabled
• Enabled
17 Input: Routing Allows the user to setup their routing matrix
among all available inputs and tracks. There
are several preset routings plus three custom
routings available. Pressing the input select
key repeatedly will cycle through all preset
routings.
Primarily accessible from the Input Select Key.
• 1  A
• 1  A / 2  B
• 1  A / 1  B
• 1  A,B / 2  A,B
• Custom Route 1
• Custom Route 2
• Custom Route 3