SONIQ QV173LTI - Manual (Page 13)

13 - 13 -
CONNECTING THE POWER CORD
• Connect the AC power cord into a wall outlet.
• Press
the / I button on the unit or remote control to turn on the unit.
Note:
• Be sure the AC power cord is disconnected and the TV is switched off before making
connections.
• Make sure that all the components are
connected correctly.
• When you are not going to use the unit for
a long period of time, disconnect the power
cord.
• The apparatus should not be exposed to
dripping or splashing and that no objects
fi lled with liquids, such as vases, should be
placed on apparatus.
• The mains plug is used as the disconnecting
device. It should remain readily accessible
and should not be obstructed during use. To
be completely disconnected from the supply
mains, the mains plug of the apparatus
should be disconnected from the mains
socket outlet completely.
Wall
Antenna
Socket
Outdoor Antenna
(VHF, UHF)
RF Coaxial
Wire
(75 ohm)
CONNECTING ANTENNA
Note:
For receiving over-the-air TV broadcasts, we
recommend that you use an external fixed
antenna. Should you require the use of a
temporary antenna, please ensure that you
purchase an antenna with suffi cient ability to
receive in weak signal areas. Only when you are
in close proximity to a transmitter will a temporary
antenna reproduce a signal as strongly as a
fi xed antenna.
Connection and setup
To AC
outlet
PLV311791W360.indd 13 PLV311791W360.indd 13 8/25/2008 3:32:35 PM 8/25/2008 3:32:35 PM