SONIQ QPI600B - Manual (Page 16)

- 15 -
The two types of programmed playback provided by this unit are title/chapter
programmed playback and track programmed playback.
Title / Chapter programmed playback
1. Press the MEMORY button.
2. Enter the title numbers in
. Use the button to move the highlight to
chapter and enter the chapter numbers in .
3. Use , , or button to move to the other field.
4. Repeat steps 2 to 3.
5. Press the PLAY button to start the programmed playback.
Note:
If you press the STOP button twice, the programmed selection will be cleared.
Track programmed playback
1. Press the MEMORY button.
2. Enter the track numbers in
.
3. Use , , or button to other field.
4. Repeat steps 2 to 3.
5. Press the PLAY button to start the programmed playback.
Playing Picture File Disc
This unit can play picture files recorded on CD-R and CD-RW discs.
Playing a Picture File Disc
1. Open the disc door.
2. Place a picture file disc onto the tray with label side up.
3. Close the disc door.
4. The unit will load the disc and automatically display the contents of
the disc on the screen, while playing the beginning of the first picture
file. These files will then be played back one by one.
5. Press or button to select a picture file to view.
6. Press the , , or CURSOR button to view and select the
files that you want to view, then press the OK button to confirm the
selected file.
Note:
• You can press the PAUSE button to interrupt playback, and press the PLAY button to resume
playback.
• You can use the
GOTO function or use the numbered buttons to enter the number of a picture file to quickly
select the image.
• Press the
ANGLE
button on the remote control to rotate the picture orientation by 90°.
Folders Files within the
current folder
Programmable Memory