Playing a disc – SONIQ QMD93B User Manual

Page 12

-11-

This owner’s manual explains the basic instructions for operating this unit. Some DVDs are produced
in a manner that allows specific or limited operation during playback. Therefore, this unit may
not respond to all operating commands. THIS IS NOT A DEFECT. Please refer to the instructions
accompanying the specific DVD in question for more information about the options available on that
DVD.
“ ” may appear on the screen during operation. A “ ” means that the desired operation is not
permitted by the unit or disc.

Playing a Disc

Slide the CHARGE / STANDBY / ON switch on the left side of the unit to the ON position.

See CUSTOMIZING THE FUNCTION SETTINGS before proceeding to step 2.

2. Slide the

OPEN knob rightwards to open the disc door.

3. Hold the disc by its sides and carefully place it onto the spindle with the label side

facing up, pushing gently until you hear a “click”.

Close the disc door. It takes a short while for your unit to load the disc. After loading, the

unit will automatically bring you to the main menu of the DVD or start playing the DVD.

If the unit does not automatically start playing the DVD, press the PLAY button.

Pausing Playback (Still mode)

Press the

PAUSE button. To resume normal playback, press the PLAY button.

Each time you press the

PAUSE button, the picture advances one frame on a DVD.

Stopping Playback

Press the

STOP button at the location where you want to interrupt playback. To resume playback at the position

where the disc was stopped, press the

PLAY button.

If you press the

STOP button twice, the unit’s memory will be cleared and pressing the PLAY button will reset

the DVD to the beginning.

Fast Forward / Fast Reverse

Press the SEARCH or SEARCH button when a disc is playing. Each time you press the SEARCH or

SEARCH button, the playback speed changes in the following sequence:

Press the PLAY button when you reach the desired point to resume normal playback.

Notes:
• The DVD player mutes sound and subtitles during reverse and forward scan of DVDs.
• The fast playback speed may differ depending on the disc.

Skip (Forward / Reverse)

• Press the

NEXT button to advance chapters/tracks.

• Press the

PREV button to go back to current or previous chapters/tracks.

• For an Audio CD, use the number buttons on the remote control to jump directly to the desired track number.

Audio Selection

On some DVDs, the sound is recorded in two or more formats. Follow the directions below to select the preferred
language and sound system.
1. While a disc is playing, press the

AUDIO button to show the current audio format number.

2. Press the

AUDIO button repeatedly to select the desired audio format.

Notes:
• If only one audio format is recorded on the DVD, the number does not change.
• Some DVDs allow you to change audio selections only via the disc menu. If this is the case, press the

MENU

button and choose the appropriate language on the disc menu.

• You can select different audio channels (Stereo, Mono Left, Mono Right or Mix-Mono) on an Audio CD by

pressing the

AUDIO button repeatedly.

Audio 1/3:Dolby D 2ch English

16 x